EN FR ES

Welcome toJ&S Lighting Co.,Ltd.Official website!
your location: Home > news

How to install crystal ceiling light

Author:J&S Lighting Co.,Ltd. viewing count:442 source: news Release date: 2020/07/12

I believe everyone will be familiar with crystal ceiling lamps. Compared with traditional ceiling lamps, crystal ceiling lamps are more fashionable and beautiful in appearance, and the decoration has been greatly improved. With the continuous improvement of people’s aesthetic awareness, crystal ceiling lamps are in home decoration Used more and more, such as: balconies, bedrooms, living rooms, kitchens, bathrooms and other places, crystal ceiling lamps have the characteristics of luxurious and noble appearance, minimal occupation, soft light, and a wide variety of styles. So what are the installation methods of crystal ceiling lamps? The following is a specific introduction to the installation method of the crystal ceiling lamp.

With the continuous improvement of people's aesthetic awareness and craftsmanship, there are many types of crystal ceiling lamps, making the installation methods of crystal ceiling lamps different. The common crystal ceiling lamps on the market are installed in the same way. First, open a hole of the same size as the lamp in the ceiling installation. During the installation of the crystal ceiling lamp, be sure to determine the installation position of the lamp, and first install the clips on both sides of the lamp. , And then place the ceiling lamp in the previously opened hole. Fix the top of the crystal ceiling lamp.

After fixing the top of the crystal ceiling lamp, connect the power cord of the crystal ceiling lamp, and then close the wiring cover and tighten it with screws. When installing the crystal ceiling lamp, pay attention to the number of fixing lamp socket bolts not less than the number of fixing holes on the base of the lamp. To ensure that the bolt diameter should match the hole diameter, if the crystal ceiling lamp base does not have a fixed mounting hole, you can punch it by yourself to fix it. Generally, the crystal ceiling lamp must have no less than 3 bolts and screws for fixing, hold it with both hands The circlips on both sides of the lamp put the lamp into the ceiling opening, so that the inner circlip is against the ceiling.

Lamp replacement often encounters lamp failure during the use of crystal ceiling lamps. This problem makes most people a very headache. In fact, it is very simple. You can refer to the crystal ceiling lamp installation drawing when replacing the lamp. The replacement procedure is very similar to the embedded ceiling lamp. First, press the open button on the mask by hand. The mask will automatically pop open. Remove the broken lamp tube, and insert the four copper pins of the new lamp tube into the four holes of the socket. One thing to pay attention to during the replacement process is that the lamp model selection must be correct.

Jiesheng recommended news

What are the ...

1. Commonly used ceiling lamps include squ...
2020/07/19

Precautions f...

As people continue to pursue high-quality ...
2020/07/19

How to instal...

I believe you will not be unfamiliar with ...
2020/07/12